The engine heater Garo Entity Heat follows the same stylish and minimalist design as the charging station Garo Entity Pro. Either slow charging/heating or the 11/22kW Garo Entity Pro charging station can be connected to the same platform.

You can later easily upgrade the heating to a Type2 charging station without any electrical work. Build the infrastructure completely and install the drives later as needed.

Garo Entity Heat & Charge is compatible with Entity Pro charging stations on the same mounting bases, installation takes place after mounting the base without electrical work.

The possibility of connecting both engine heaters and charging stations to the same mounting platforms brings easy infrastructure construction within everyone's reach. The charging/heating unit can be easily and quickly upgraded to a full-power charging station easily without electrical installation.

Characteristics

• Two sockets
• Temperature controlled timer according to outside temperature 0.5-3h
• MID meter
• Optional continuous power function
• Lockable cover
• Can be installed on a wall, stand or pole.
• A wide range of accessories
• Connection to the mounting base with a terminal block, can be chained.

Technical information

• Model: GARO Entity Heat EH 210-2 M IDLF with mounting base
• 2x Timer 0.5-3h temperature-controlled Schuko socket or continuous electricity.
• 2x kWh meter (Modbus MID)
• 2x C10A (charging power per point 2.3kW)
• 30mA fault circuit breaker
• Chainable terminal block 5nap max 16mm2 Al/Cu
• Voltage: 230/400V
• Protection level: IP44/IK10.